«Previous    Next»
Home Made Pipe Bender
Dale Collum, Huckabay FFA, Stephenville, Texas: "I'm an instructor in our ag program. We made a pipe bender for bending small diameter pipe or rerod.
It consists of a 15-in. wheel rim cut in half with a piece of 2 3/8-in. pipe welded into the center and another piece of 2 3/8 in. pipe welded from the center pipe out to the edge of the rim. On the opposide of the rim, weld a small piece of channel iron to hold the pipe you're bending. We use a piece of 2 in. pipe, inserted into the 2 3/8-in. pipes, as a lever to roll the rim. The two pieces of pipe give you two positions for leverage for bending at different angles."


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1995 - Volume #19, Issue #3