You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Best Penetrating Oil Is The Cheapest
Machinist’s Workshop magazine recently tested penetrating oils for break-out torque on rusted nuts. They “scientifically rusted” a bunch of nuts, treated them with various penetrants, and then measured the torque it took to remove them. Here are the results:
• Nothing 516 pounds
• WD-40 238 po
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Best Penetrating Oil Is The Cheapest FARM SHOP Miscellaneous Machinist’s Workshop magazine recently tested penetrating oils for break-out torque on rusted nuts They “scientifically rusted” a bunch of nuts treated them with various penetrants and then measured the torque it took to remove them Here are the results: • Nothing 516 pounds • WD-40 238 pounds • PB Blaster 214 pounds • Liquid Wrench 127 pounds • Kano Kroil 106 pounds • ATF-Acetone Mix 53 pounds The ATF-Acetone mix was a “home brew” mix of 50-50 automatic transmission fluid and acetone Note that the “home brew” was better than any commercial product Note also that Liquid Wrench was as good as Kroil for about 20 percent of the price Thanks to reader Larry Heineman at L&G Products Co manufacturer of “Add-A-Stick” excavator extensions - www add-a-stick net - for passing along this story
To read the rest of this story, download this issue below or click
here to register with your account number.
