You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Hydraulic Lift For Baler Pickup
"In soft ground it lets me raise the pickup enough to keep teeth from digging in and it's also handy along roadsides to keep the pickup up out of the gravel," says Louis Dahlheimer, Dayton, Minn., who mounted a hydraulic lift cylinder on his New Holland 273 baler's pickup.
The 2 by 8-in. cylinder installs at one
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Hydraulic lift for baler pickup HAY & FORAGE HARVESTING Bale Handling (5) 16-4-11 "In soft ground it lets me raise the pickup enough to keep teeth from digging in and it's also handy along roadsides to keep the pickup up out of the gravel," says Louis Dahlheimer, Dayton, Minn., who mounted a hydraulic lift cylinder on his New Holland 273 baler's pickup.
The 2 by 8-in. cylinder installs at one end of the baler, attached to an angle iron bracket that's bolted to the side of the baler housing. The lower end of the cylinder attaches to the lift bracket on the pickup that would normally be adjusted manually.
"Now the only time I have to get off the tractor is to dump the hay basket that I pull behind the baler," says Dahl heimer, who's used the idea for the past year. "In normal operation, I run it with the hydraulic valve in the float position. But whenever needed,
I can quickly raise the pickup up out of the ground."
Contact: FARM SHOW Followup, Louis F. Dahlheimer, 13681 Zanzibar Lane, Dayton, Minn. 55327 (ph 612 427-3636).
To read the rest of this story, download this issue below or click
here to register with your account number.
